5.20.2010

OLD LATHES

This may not look like much, but Keddie and I clocked a good 20 hours into this part for the shops lathe.  Hand made tool and boring bar for an internal left hand thread 29' .125 lead thread.  Now the lathe works again. 

5 comments:

  1. All with a beer in hand too, eh?

    ReplyDelete
  2. correction... it is a metric 30deg lead screw by 8tpi, not a 29deg acme. metric and sae together at last.

    ReplyDelete
  3. motorcycle helmets nice blog please see mine as well

    ReplyDelete
  4. i like this photo, but the only problem i see with it is there are no welds involved..

    ReplyDelete